|
|
The CAR-I BS2 Carrier Board
Breadboarding is great, but what happens when you need a more permanent circuit? The CAR-I Carrier Board for the Basic Stamp II is the answer. Unlike other carrier boards, this one is 6" long and has the same layout as a standard 6" solderless breadboard. You can transfer your circuits directly. Just solder wires and components in the same place they go on your breadboard. The integrated serial port connector makes programming and serial communications a snap. Just hook up a 9 volt battery and you are ready to go.
Features include:
 |
Large prototyping area holds up to 5 14-pin DIPs. |
|
High-quality machine-pin socket for the Stamp |
|
Two uncommitted busses can connect to 5V or ground |
|
Serial connector can program the Stamp or allow communications with another device |
|
Easy transfer of circuitry from standard prototype boards |
|
Rubber feet are removable for permanent mounting |
The CAR-1 with a BSIISX Installed (BSIISX not included)
Get it Now!
Try an CAR-I for 21 days. If you aren't delighted, just send it back undamaged for a full refund of your purchase price. But once you see all the room you have for your projects, you won't want to be without it. The CAR-I is under $20.
CAR-I BS2 Carrier Board $19.95 each [THIS ITEM IS DISCONTINUED]
Notice: Basic Stamps are a product of Parallax Inc. AWC is in no way affiliated with Parallax.
