; Defines for APP-II routines

; Description: Set up RS232 port (19.2K baud)
; Call with bank= 0
; Returns with bank= 0
SerialSetup EQU 0x0F03

; Description: Send data in W to RS232
; Call with bank= Any
; Returns with bank= 0
SerialTransmit EQU 0x0F14

; Description: Read character from RS232 to W (waits)
; Echos character back to sender
; Call with bank= Any
; Returns with bank= 0
SerialReceive EQU 0x0F0E

; Description: Write byte at FSR to RS232 as ASCII hex 
; Call with bank= Any
; Returns with bank= 0
Hexout EQU 0xF1A

; Description: Writes least significant 4 bits of W out as ASCII hex
; Call with bank= Any
; Returns with bank=0
Hexout0 EQU 0xF1D

; Description: Delays # of cycles in W (11 to 255)
; does not count time to load W or PCLATH, if necessary
; Call with bank= Any
; Returns with bank= No change
Delay EQU 0xF23

; Description: Writesdata at EEDATH:EEDATA to EEADRH:EEADR
; (Flash memory)
; Call with bank= 2
; Returns with bank= No change
FlashWrite EQU 0xFBF

; Description: Read word from EEADRH:EEADR to EEDATH:EEDATA
; (Flash memory)
; Call with bank= 0 or 2
; Returns with bank=2
FlashRead EQU 0xFCA

; Description: Read a hex byte from RS232 to W & location 0x20
; Call with bank=Any
; Returns with bank=0
; warning routine uses
; RAM 0x20
GetHexByte EQU 0xFAD